Table of Contents
Advertisement
This chapter describes how to install your ENW-3503 PC
Card. Installation procedures also cover many popular
Network Operating Systems.
2.1.
HARDWARE INSTALLATION
1. Hold the card label up and insert the card into the
computer's PCMCIA slot with the 68 pin
connector facing the computer.
2. Plug the 15-pin PC Card connector with both RJ-
45 LAN cord and RJ-11 telephone cord into the
15-pin socket on the PC Card. Now the hardware
installation is completed. The PC Card is
powered directly by the PC.
3. Connect the RJ-45 (8-pin) plug to the LAN and the RJ-11
(6-pin) plug to the telephone wall outlet.
PLANET ENW-3503 User's Manual
2.
INSTALLATION
Type II or Type III
PC Card slot(s)
PLANET Logo
Label facing up
Advertisement
Table of Contents
