Table of Contents
Advertisement
♦ select the only one choice for the ENW-3503 PC Card,
then press OK and NEXT
♦ Windows NT 4.0 will grant configurations for
-- TCP/IP
-- NWLink IPX/SPX
-- NetBEUI
...
These configurations are unique for each
network. If you want to change them, ask your
network administrator for help.
♦ Press Next twice to use default NETWORK SERVICES
settings
♦ Enter the correct path for NT 4.0 system source
files.
♦ A dialog box will pop up. Give appropriate system
resources to the ENW-3503 PC Card; the settings must be
unique
for
this
Recommendation" for NT 3.51 details
♦ Press NEXT twice. Enter COMPUTER NAME then
press NEXT
♦ Press FINISH
If Network has been installed
♦ Select ADAPTERS
♦ Press ADD to add network adapters
♦ Press HAVE DISK button
♦ Insert the ENW-3503 PC Card driver disk into floppy disk
drive
♦ Enter the correct path for Windows NT 4.0 drivers then
press OK.
♦ A dialog box will pop up. Give appropriate system
resources to the ENW-3503 PC Card; the settings must be
unique
for
this
Recommendation" for NT 3.51 details
♦ Press OK when all setting are completed.
♦ Press CLOSE to complete NETWORK setting
PLANET ENW-3503 User's Manual
2 INSTALLATION
device.
Refer
to
device.
Refer
to
"Resources
"Resources
2-11
Advertisement
Table of Contents
