4G Modem Chapter 1 Introduction 1.1 Introduction Congratulations on your purchase of D-LINK’s DWM-311 M2M Cellular Modem. With this D-LINK cellular modem you have made a great first step in the world of connected Internet of things (IOT) by simply inserting a SIM card from the local mobile carrier into this device to get things connected.
4G Modem Power Adapter 1pcs Plug(US/EU/AU/UK) 1PCS 1.3 Hardware Configuration ➢ Left View Ethernet Power ➢ Right View 3G/4G Reset 3G/4G Antenna Button Slot Antenna ※Reset Button RESET button provides user a quick and easy way to resort the default setting. Press the RESET button continuously for 6 seconds, and then release it.
4G Modem 1.4 LED Indication LED Color Indication Description Steady On: Device power is on Blue Off: Device power is off Power Red Steady on: Cellular is not ready or no cellular signal. Red Flash: Cellular is ready but regiister status is not ready. Blue Blue Steady On: The signal is ready and regists to operator.
4G Modem 1.5.2 WARNING Only use the power cable that comes with the ⚫ package. Over voltage rating is dangerous and may ⚫ damage the product. Do not open or repair the case yourself. If the ⚫ Attention product is too hot, turn off the power immediately and have it repaired at a qualified service center.
Page 9
4G Modem Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4G Modem 1.5.3 HOT SURFACE CAUTION CAUTION: The surface temperature for the metallic enclosure can be very high! Especially after operating for a long time, installed at a closed cabinet without air conditioning support, or in a high ambient temperature space.
This chapter describes how to install and configure the hardware 1.6.1 Mount the Unit The DWM-311 series can be placed on a desktop, or use extender to place on DIN-Rail bracket or mount on the wall. 1.6.2 Insert the SIM Card WARNING: BEFORE INSERTING OR CHANGING THE SIM CARD, PLEASE MAKE SURE THAT POWER OF THE DEVICE IS SWITCHED OFF.
1.6.3 Connecting to the Network or a Host The DWM-311 series provides one RJ45 port to connect to Giga-Ethernet. It can auto detect the transmission speed on the network and configure itself automatically. Connect one Ethernet cable to the RJ45 port (LAN) of the device and plug another end of the Ethernet cable into your computer’s network port to...
The default setting for both username and password is ‘admin’ Chapter 2 Setup The DWM-311 series connect to a machine via giga ethernet interface for 3G/4G network connection. DWM-311 series also provides another function with NAT router. It can help the network application more flexible. 2.1 Network...
4G Modem The unit will provide a NAT service and provide a simple firewall for the 2. By default NAT is connected device. selected Modem The unit will pass the cellular IP to connected device via ethernnet 2.1.2 Cellular Device Mode Item Value setting Description...
Page 15
4G Modem When Auto is selected, it means it will authenticate with the server either PAP or CHAP. 1. A Must filled setting Specify the IP type of the network service provided by your 3G/4G network. IP Type 2. By default IPv4 is It can be IPv4, IPv6, or IPv4v6.
4G Modem An Optional setting 2.1.3 Ethernet Ethernet IP Item Value setting Description 1. IPv4 format. The LAN IP Address of this unit. 2. A Must filled setting 255.255.255.0 (/24) is Netmask The Subnet Mask of this unit. set by default The box is unchecked by DHCP Server Click Enable box to activate DHCP Server.
4G Modem 1. Numberic string IP Pool Start format. The IP Pool of this DHCP Server. It is Starting Address entered in this field. 2. A Must filled setting 1. Numberic string IP Pool End format. The IP Pool of this DHCP Server. It is Ending Address entered in this field. 2.
Page 18
4G Modem Virtual Server Rule Configuration Item Value setting Description 1. String format can be Name any text The name of current rule 2. A Must filled setting This field is to specify the IP address of the interface selected in the WAN Server IP A Must filled setting Interface setting above.
Page 19
4G Modem It means the option “Protocol” of packet filter rule is UDP. Public Port selected a predefined port from Well-known Service, and Private Port is the same with Public Port number. Public Port is selected Single Port and specify a port number, and Private Port can be set a Single Port number.
4G Modem 2.1.5 DDNS DDNS Item Value setting Description The box is unchecked by DDNS Check the Enable box to activate this function. default DynDNS.org is set by Select your DDNS provider of Dynamic DNS. It can be DynDNS.org, NO- Provider default IP.com, TZO.com etc...
4G Modem 2.2.1 System Time Device Mode Item Value setting Description Show the current time of the unit. Current Time When select Auto, unit will sync the time via cellular cell, and then try to use 1. A Must-filled item. Sync Time 2.
4G Modem 2.2.2 Language Language Item Value setting Description Language setiing of the WebGUI. 1. A Must-filled item. Language List 2. English is selected by default. 2.2.3 System Information System Information Item Value setting Description Show the model name of the device Model Name Serial Number Show the serial number of the device...
4G Modem 2.2.4 Scheduling Scheduling Item Value setting Description Press Add to create a schedule rule for system. Time Schedule Time Schedule Configuration Item Value Setting Description Rule Name String: any text Set rule name Rule Policy Default Inactivate Inactivate/activate the function been applied to in the time period below...
4G Modem Time Period Definition Item Value Setting Description Week Day Select from menu Select everyday or one of weekday Start Time Time format (hh :mm) Start time in selected weekday End Time Time format (hh :mm) End time in selected weekday Chapter 3 Administrator 3.1 Manager 3.1.1 FW Upgrade...
4G Modem Backup Configuration Settings Item Value setting Description Backup Configuration Select “Download” to backup current configuration to a file. Settings Select “Upload” to restore configuration from selected file. 3.1.2 Password & MMI Password Item Value setting Description 1. String: any text 2.
4G Modem If someone tried to login the web GUI with incorrect password for more than the counting value, an warning message “Already reaching maximum Password-Guessing times, please wait a few seconds!” will be displayed and ignore the following login trials. The Enable box is Check the Enable box to activate the auto logout function, and specify the Login Timeout...
4G Modem Value Range: 1 ~65535. 3. Default value is Check the Enable box to activate the SSH Telnet function for connecting from LAN or WAN interfaces. disable such service You can set which number of Service Port you want to provide for the corresponding 1.
4G Modem This field is to specify the remote host to assign access right for remote access. Remote IP A Must filled setting Select Any IP to allow any remote hosts Select Specific IP to allow the remote host coming from a specific subnet. An IP address entered in this field and a selected Subnet Mask to compose the Subnet Mask subnet if Remote IP set in Specific IP.
Page 29
4G Modem The oldest message(s) will be space and prevent it from run out of storage. deleted when the SMS storage is going to full.0 means the function is ignored. The box is unchecked by Check the Enable box to activate the Event Management function. Event Management default After enable the function, press Edit to set the management rule.
Page 30
4G Modem Account Configuration Item Value setting Description 1. Mobile phone number Fill the specify Phone number to activate the Event Management function. Phone Number#1 / #2 format User just can handle Event Management function on these phone numbers. 2. A Must filled setting Activate the phone tto have Managing / Notifying or both functions.
Page 31
4G Modem Managing Events Item Value setting Description Enable the option and user can query the current connection status via Cellular Status sending SMS “status” from specify phone number which enables managing function. Enable the option and user can force the current connection re-econnect Cellular Reconnect once via sending SMS “reconnect”...
Page 32
4G Modem New SMS Item Value setting Description Write the receivers to send SMS. User need to add the semicolon and Receiver compose multiple receivers that can group send SMS Write the SMS context to send SMS. The router supports up to a maximum of Text Message 512 characters for SMS context length.