Table of Contents
Advertisement
10. Click CONTINUE button
11. Insert the driver disk into floppy disk drive, then
enter the correct path (A:\).
12. Take a choice for the Ethernet + Fax/Modem PC
Card then press OK.
13. A dialog box will be poped up for the driver
settings change.
14. Give appropriate system resources to the
ENW-3503 PC Card, the settings
must be unique for this device.
Resources Recommendation
I/O Base
I/O:300.
320, 340, 360
Interrupt
IRQ:5. If your laptop is equipped
(IRQ)
with
higher interrupt (IRQ:11) may
be needed.
Base Memory
D000. Possible alternative: D800
COM Port
COM2 to COM4. Select one of
the COM port that is not in use
by other communication devices.
15. When all settings are completed, press OK
Windows NT will load network and grant
configurations for
-NWLink
-TCP/IP
-Netbeui
Typically the configurations are unique for
each network. Ask your network administrator
for help if you want to change them.
16. Once all network softwares are well loaded, press
OK. The configuration and bindings for the PC
PLANET ENW-3503 User's Manual
2 INSTALLATION
Possible
alternative:
multimedia
devices,
a
2-9
Advertisement
Table of Contents
