Table of Contents
Advertisement
3 MODEM BASICS
things as "customize" the settings of your ENW-3503 PC
Card, or store phone numbers you commonly connect to.
Once the ENW-3503 PC Card is connected to your computer's
serial port and telephone line, open the Windows 95
"Accessories" program group, and open the Hyper Terminal
Program. The program will prompt you for a name and icon to
use for your new connection. Type the name Test Connection
then press <Enter>.
Next, you will be prompted for country information, area code,
phone number, and the device used to make the connection.
For this test purpose, do not enter a phone number; simply
choose the COM port your Ethernet + Fax/Modem is
connected to from the "Connect Using" list. Click "OK" when
finished.
The next window sets the COM port settings. The settings
used for the Comet should be as follows:
Bits per second:
Data bits:
Parity:
Stop bits:
Flow Control:
Click "OK" when finished. After you have done this, save your
new connection by selecting "Save" from the "File" menu then
click "OK." A new connection icon will be added to your
Hyper Terminal folder.
You are now ready to start entering AT commands.
In the terminal window, type:
AT<Enter>
LANmodem responds
OK
3-2
115200
8
None
1
Hardware
LAN + Fax/ Modem PC Card
Advertisement
Table of Contents
