Table of Contents
Advertisement
Slave Unit
Slave Unit is to control multiple devices simultaneously, which are connected to same network. ("In the same
network" means the the the third section in the IP address digits are the same )
XPOSE do operation on one device, same operation synchronized to other devices.
For example, there is another devices linked to the same network, one with IP: 192.168.0.112, SN:0027; the other
with IP: 192.168.0.129, SN: 3344.
If you want the same operation on 3344 to be backed up to 0027, you can do as follows:
1. Set device numbers；
2. Select the IP of the device in the drop-down menu for Device IP;
3. click ON,the tow device are connected when the red pot
turns to be green one
;
4. click OFF to disconnect, it could not control two device at the same time.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
40
Advertisement
Table of Contents
