Table of Contents
Advertisement
Status: ON/OFF
Gamma: 0~9.99 (Adjust the brightness of picture,the higher the number,the higher the brightness)
Bright Factor: 0~9.99
EDID Setting
Input Port: Current Port and type
Customized EDID: Monitor Name, Width ,Height and Frequency
Output Setting
Click any output port , the module where the port locates is selected. Users can do settings to the modules now. A
red rectangle
flashes around the port when it is chosen.
Resolution Setting
Output Switch: Slide to ON or OFF
Format Range: Select ALL or Module. All means this setting is applied to all output ports, Module means this
setting is only valid on this module.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
18
Advertisement
Table of Contents
