Table of Contents
Advertisement
ACPI Standby State The Standby mode supported on this mainboard is
Power Management/
Video Power Down
Hard Disk Power
Down Mode
Standby Time Out
(Minute)
Suspend Time Out
(Minute)
Power Button Function allows you to set power Button function.
Restore on AC/Power
Resume on Ring Allows you to enable / disable the Resume on Ring
Resume on LAN Allows you to enable / disable the Resume on LAN
S1 (POS) for Power on Suspend under Windows
98 or later O/S ACPI mode.
Allows you to enable / disable the Power manage-
ment / Advanced Power Management function.
APM
Allows you to select the Video Power Down Mode.
Choices: Disabled; Standby; Suspend
Mode
Allows you to select the Hard Disk Power Down
Mode.
Choices; Disabled; Standby; Suspend
To set the duration of Standby Time Out.
Choices: 1; 2; 4; 8; 10; 20; 30; 40; 50; 60
To set the duration of Suspend Time Out.
Choices: 1; 2; 4; 8; 10; 20; 30; 40; 50; 60
Choices: On/Off; Suspend
Allows you to set the restore state from AC/Power
Loss
Loss.
Choices: Last State; Power Off; Power On
Signal function.
An input signal on the serial Ring Indicator (RI) Line
(in other words, an incoming call on the modem)
Awakens the system from a soft off state.
function.
69
Chapter 4 BIOS Setup
Advertisement
Table of Contents
