4-6.4 Advanced Chipset Features - SOLTEK 85ERV Instructions Manual

4-6.4 Advanced Chipset Features

Advanced Chipset Features is used to modify the values of chipset
buffers. These buffers control the system options.
Run the Advanced Chipset Features as follows:
1. Choose "Advanced Chipset Features" from the Main Menu and a
list of option will appear:
AMIBIOS NEW SETUP UTILITY - VERSION 3.31a
Advanced Chipset Features
DRAM Timing
Configure SDRAM timing by SPD
SDRAM Frequency
SDRAM CAS# Latency
SDRAM Bank Interleave
SDRAM Burst Length
SDRAM Command Rate
Memory Hole
AGP Mode
AGP Read Synchronization
AGP Fast Write
AGP Comp. Driving
Manual AGP Comp. Driving
AGP Aperture Size
AGP Master 1 W/S Write
AGP Master 1 W/S Read
APIC interrupt Mode
USB Controller
USB 1.1 Device Legacy Support
USB 1.1 Port 64/60 Emulation
F1: Help : Select Item
Esc: Previous Menu
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp / PgDn / + / - keys. An explanation
of the <F> keys follows:
<F1>: "Help" gives options available for each item.
<F9>: Setup BIOS default values.
<F10>: Save and Exit Setup.
3. Press <ESC> to return to the Main Menu when you finish setting up
all items. The following item descriptions are provided as a quick
guide to your setup.
Enabled
Auto
2.5
Disabled
4
2T
Disabled
8X
Disabled
Disabled
Auto
CB
64MB
Disabled
Disabled
Disabled
6 USB Ports
Disabled
Disabled
+/- : Change Values
Enter: Select Sub-Menu
63
Chapter 4 BIOS Setup
Setup Help
F9: Setup Defaults
F10: Save and Exit