Air Shroud; Removing The Air Shroud; Installing The Air Shroud - Dell PowerEdge MX760c Installation And Service Manual

Air shroud

Removing the air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
Holding the air shroud at both ends, lift the air shroud out of the system.
Figure 24. Removing the air shroud
Next steps
1. Installing the air shroud.

Installing the air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the slot on the air shroud with the tabs on the chassis wall.
2. Lower the air shroud into the system until it is firmly seated.
Safety instructions. .
Before working inside your
Safety instructions. .
Before working inside your
system.
system.
Installing and removing system components 63