Installing The Perc Card - Dell PowerEdge MX760c Installation And Service Manual

Figure 97. Removing the PERC card (H755 MX)
Next steps
1. Follow the procedure listed in

Installing the PERC card

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Pull the blue pull tag to raise the lever up on the PERC card.
2. Align the connector on the PERC card with the connector on the system board.
3. Align the guides on the PERC card with the slots on the system.
4. Press the PERC card firmly until it is fully seated.
5. Close the lever on the PERC card.
After working inside your
Safety instructions.
Before working inside your system
system.
Installing and removing system components 119