Installing The Perc Card - Dell EMC PowerEdge R350 Installation And Service Manual

Figure 63. Removing the PERC card
Next steps
1. Replace the PERC card.

Installing the PERC card

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the expansion card
Steps
1. Connect the PERC cable.
2. Hold the metal holder and align golden finger with socket. Slide the PERC card till it is firmly seated in place.
3. Using Phillips #2 screw driver, tighten the two screws from the fan cage.
Safety instructions.
Before working inside your
riser.
system.
Installing and removing system components 69