Using Several Handsets; Handset Settings; Internal Calls - Gigaset A120 User Manual

Using several handsets

Internal calls

Internal calls are no-cost calls to other handsets
that are registered to the same base.
Press the display key.
INT
Your own handset is marked "<".
either ...
Call a single handset:
Enter number of handset,
~
e.g.
or ...
Calling all handsets:
Press the star key.
P
... then
Ending the call:
Press the end call key.
a
Internal conference/Call connecting
You are in conversation with an external caller.
To confer:
(the external party hears the wait melody)
¢
INT
c
Select a handset
party).
¢
End:
MENU GO BACK
You are reconnected with the external caller.
Or to connect the call:
¢
Select a handset
¢
INT
a
call if required)
You can also press the end call key
ately (without announcing the call). If the internal
party does not answer or is busy the call will come
back to you automatically.
Barging in on an external call
You are conducting an external call. An internal
party can 'barge in' on your call and join in the con-
versation (all parties hear a beep). Requirement:
The function is activated.
BARGE IN
Activating/deactivating internal barge-in
¢
MENU BASE SET
‰
( = on).
BARGE IN
Internal barge-in
The display shows
LINE IN USE
in on the call.
c
Press the talk key.
You are connected. All parties hear a signal tone.
The display shows
CONFERENCE
a
End: Press the end call key.
2
.
(confer with internal
¢
OK.
¢
c
(announce the
Press the end call key.
a
immedi-
¢ ¢
ADD FEATURES
. You wish to barge
.
5
If one of the internal parties presses the end call
a
key , a signal tone sounds. This does not affect
the connection between the other handset and the
external caller.
Looking for a handset ("paging")
If you have mislaid your handset you can page it
with the help of the base. To do this, briefly (2 sec-
onds max.) press the register/paging key on the
front of the base (page 1). All handsets will ring at
the same time.
End paging: Briefly press the registration/paging
key (on the base) or the talk key
set.
Pressing the registration/paging key for
i
more than 2 seconds puts the base into
registration mode. The handsets will not
ring in this case.

Handset settings

Changing the display language
¢
You can view the display texts in different lan-
guages.
¢
O 2
MENU
(e.g. digit combination
Q 1
German
Q 2
English
Q I
Danish
Q 4
Norwegian
Q 5
Swedish
Activating/deactivating Auto Answer
When you get a call you can simply lift the handset
out of the base or charger without having to press
c
the talk key
To activate: MENU
To deactivate: MENU
Activating/deactivating battery warning
tone
If this function is activated, a beep sounds in idle
status when the battery pack is almost flat.
To deactivate: MENU
To activate: MENU
c
on any hand-
¢
Select language
Q1
for German):
Q L
Finnish
Q M
Polish
Q N
Croat
Q O
Czech
1 Q
Russian
.
¢
O 1 1
.
¢
O 1 Q
.
¢
O 4 Q
.
¢
O 4 1
.