Find The Phone Ip Address; Reset To Factory Settings; Registering Phone; Manual Configuration - Gigaset Maxwell 2 Configuration Manual

Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.

Find the phone IP address

Find out your Gigaset phone IP Address.
Press Menu button.
Go to Settings menu.
Go to Info submenu.
Scroll down to the IP address info.

Reset to factory settings

This step is not required for brand new out-of-the-box phones, however, if the phone has been
already used then it is a must.
Login to phone web administration interface with your password. Please note, factory default
login password is: admin.
Click System on the left navigation menu.
Click Reboot and Reset in the submenu.
Click Reset to Factory Settings button and confirm on prompt.
Wait sometime prior for device to reboot.
NOTE: Do not unplug or remove power to the phone while it is updating firmware and
configuration.

Registering phone

This chapter describes how to identify Gigaset phone model, requirements that must be met and
how to register the phone using manual configuration or auto provisioning.
The following topics are covered:

Manual configuration

Auto provisioning
Manual configuration
This chapter describes how to set UAD settings, create PBXware extension and register the
phone.
The following topics are covered:
UAD settings
Creating extension
Registering phone