Table of Contents
Advertisement
MAINTENANCE
HYDRAULIC SYSTEM - CHANGE OIL, REPLACE
SUCTION STRAINERS AND PULSATION DAMPER
Legend for illustration Z25013
(3)
Main hydraulic pump -3-
(5)
Flexible hoses
(6)
Flange
(7)
O-rings
(8)
Suction strainer
(9)
Control oil pump (pilot oil circuit)
(10)
PTO gear lubrication pump
(11)
Suction oil reservoir
(12)
Drain coupling
Replace Suction Strainer of Main Pump (3)
1. Remove mounting bolts of flange (6).
2. Move away flexible hose (5) with flange (6).
3. Remove strainer (8) with O-rings (7) and discard.
4. Install new strainer (8) with new O-rings (7).
5. Locate flange (6) above the strainer and tighten the mounting
bolts of flange (6).
6. Check to make sure that the hose clamps of the suction
hoses are in good condition and properly fitted.
4.13 EVERY 2000 OPERATING HOURS OR YEARLY
405
Advertisement
Table of Contents
