Table of Contents
Advertisement
MAINTENANCE
4.7.3
AUTOMATIC LUBRICATION SYSTEMS FILL GREASE CONTAINERS
Fill the grease containers of the Central Lubrication System and
Swing circle pinion Lubrication System when the corresponding
message "grease container empty" is displayed on the ETM
screen. Make sure the grease filters in the filling lines are not
obstructed. If necessary service the Grease Filters.
Legend for illustration Z21666A
(1)
Grease level gauges for manual checking of the
grease level
(2)
Grease filter for central lubrication system. Before
filling the grease container make sure the filter is not
obstructed. Service the filter element according to
the instructions on next page.
(3)
Grease container of the central lubrication system
(5)
Grease filter for swing circle pinion lubrication sys-
tem. Before filling the grease container make sure
the filter is not obstructed. Service the filter element
according to the instructions on next page.
(6)
Grease container of the swing circle pinion lubrica-
tion system
Fill the grease containers according to the instructions on
page 192.
REMARK
Check condition and fastening of both grease containers.
4.7 WHEN NECESSARY
275
Advertisement
Table of Contents
