Settings Of The Text Display Unit - Komatsu 06253 Operation & Maintenance Manual

OPERATION
3.4.6

SETTINGS OF THE TEXT DISPLAY UNIT

Setting:
Set enable key switch "Adjustments" (E) to ON position
Set Selector switch "Adjustments" (D) to position "1"
The cursor flashes in the enter zone.
Use key 4 (PAGE NO) to shift the cursor to the input place.
Change the values using key 2 (UP) or 3 (DOWN). Check the
new values and then press key 1 (MESSAGE) or key 6 (DATA
OUT) to accept the new values and to finish the input function.
Example:
# F:
Setting:
With enable key switch (E) in ON position, set selector switch (D)
to position "2". Input procedure is the same as described under
DATE.
Example:
# F:
Setting:
With enable key switch in ON position, set selector switch (D) to
position "3". Input procedure is the same as described under
DATE.
DATE
date: 03.07.07
new date: 17.07.07
TIME OF DAY
time: 08:41:30
new time: 15:50:15
HOUR METER
3.4 ELECTRONIC TEXT MONITORING SYSTEM ETM
(Message page 27)
(Message page 28)
(Message page 29)
113