3.4 ELECTRONIC TEXT MONITORING SYSTEM ETM
Grouping of the Messages according to their
Priority
The messages are divided into four priority groups. A Message of
a higher priority group remains on the display, even if further mes-
sages of a lower priority group occur. These messages are regis-
tered and statistically analyzed, although the are not displayed.
1st
Priority Group:
Fault messages resulting in automatic shifting to low idle speed respectively,
shutdown of the engine
System adjustments
Page number:
9:
Low idle speed: coolant temperature too high
11:
Low idle speed: High pressure filter #1 restricted
12:
Low idle speed: High pressure filter #2 restricted
13:
Low idle speed: High pressure filter #3 restricted
27:
# Date: (adjustment)
28:
# Time: (adjustment)
29:
# Hours of operation: (adjustment)
30:
# Protocol and statistics cancelled (adjustment)
39:
Engine shutdown: main shut-Off (gate) valve closed
40:
Engine shutdown: overspeed
42:
Low idle speed: too low coolant pressure
43:
Engine shutdown: emergency stop switch actuated
47
Engine shutdown by engine control module
51:
Engine shutdown: pull switch from ground man
actuated
2nd
Priority Group:
Page number:
10:
Engine shutdown: engine oil pressure too low
57
Load limit regulation fault
NOTICE
If a fault message of priority group 1 or 2 is displayed, move the shovel to a
safe place, shut down the engine and inform your service staff about the
trouble condition.
124
OPERATION