Delivery Of The Shovel - Komatsu 06253 Operation & Maintenance Manual

INTRODUCTION
1.4

DELIVERY OF THE SHOVEL

The Shovel is being delivered disassembled into its main compo-
nents.
For assembling the Shovel refer to the separate Manual
"Assembly Procedure" in Volume 2 Binder.
Personnel entrusted with work on the machine must have
read the Assembly Manual, the Operation,- Lubrication- and
Maintenance Manual and in particular the section on safety
before beginning work. Reading the instructions after work
has begun is too late.
If there are any questions concerning the assembling procedure,
contact your local Service Center.
Prior to first operation, inspect the Shovel thoroughly with the Ser-
vice Engineer responsible for the erection of the machine. Check
all fluid levels according to the Lubrication and Maintenance
Schedule.
Damages and defects caused by incorrect operation and mainte-
nance are not covered by the manufacturers guarantee.
NOTICE
If the Shovel is equipped with a fire suppression system,
make sure that the system is ready for operation.
SPARE PARTS
For your spare part orders refer to the Parts Catalogue.
In order to keep your Shovel in first-class operating condition use
only genuine spare and wear parts.
The use of any part other than the genuine part releases the
KOMATSU MINING GERMANY GmbH from any guarantee.
SERVICE
For all questions related to your Shovel please contact your local
Service Center.
In all your written or phoned inquiries please indicate the model
and serial number of your Shovel.
WARNING

1.4 DELIVERY OF THE SHOVEL

7