Table of Contents
Advertisement
Video Configuration
This section configures the video settings. Note that the configuration options vary depending
on the "Boot type" selected in the "Boot" menu.
Primary Display
Select the primary display for the system. Note that this option will be shown only if the
"Boot type" is set to "Dual" or "UEFI". Depending on your selection, the order of video
device initialization will be as follows:
Auto mode: PEG (PCIe Graphics devices connected to PEG lanes directly routed from
the CPU )->PCIe graphics devices->PCI graphics devices->IGFX (internal graphics)
IGFX: IGFX (internal graphics)->PEG (PCIe Graphics devices connected to PEG lanes di-
rectly routed from the CPU)->PCIe graphics devices->PCI graphics devices
PEG: PEG (PCIe Graphics devices connected to PEG lanes directly routed from the CPU)
->PCIe graphics devices->PCI graphics devices->IGFX (internal graphics)
PCIe: PCIe graphics devices->PEG (PCIe Graphics devices connected to PEG lanes directly
routed from the CPU )->IGFX (internal graphics)->PCI graphics devices
Chapter 7 BIOS Setup
Chapter 7
Internal Graphics Device
Enable, disable or automatically detect the internal graphics.
Boot display
Prioritize device combination for display during system boot. Note that this option will
be shown only if the "Boot type" is set to "Dual" or "Legacy".
The options are as follows:
DVI+DP1
DVI+VGA
DP1+DVI
DP1+VGA
VGA+DVI
VGA+DP1
48
Advertisement
Table of Contents
