Table of Contents
Advertisement
Installing a Mini PCIe Card
The system board is equipped with one Mini PCIe slot that provides USB, PCI and mSATA interfaces.
1.
Grasp the Mini PCIe card by its edges and align the notch in the connector of the PCIe card with
the notch in the connector on the system board.
2.
Push the Mini PCIe card down and use the provided mounting screws to secure the card on
the system board.
Note:
The Mini PCIe slot is available in WM342-KD330 (only with Intel
Chapter 3 Installing Devices
Chapter 3
Installing an M.2 Card
The system is equipped with one M.2 socket, supporting both the M.2 22x60mm and 22x80mm
(key M) form factors. Use the following procedure to install an M.2 card:
1.
To install an M.2 type 2260 card, please install the standoff at the 60mm mounting
2.
Align the notch at the edge of the M.2 card with the key in the connector.
3.
Insert the M.2 card into the connector.
Mounting screw
Note:
The M.2 slot is available in WM342-KD331 (with both Intel
®
Q170 Chipset).
and the SKU with Intel
15
®
C236 and Q170 chipsets)
®
C236 chipset further supports Intel
®
Optane™ memory.
Standoff
M.2 card
Advertisement
Table of Contents
