Table of Contents
Advertisement
Installing a 2.5" SATA Drive
The system can accommodate two 2.5" SATA drives. Use the following procedure to install a
SATA drive onto the system.
1.
Remove the thumb screws that secure the HDD drive bay to the chassis and remove the
drive bay.
Thumb screw
2.
Secure the hard drive to the drive bay. Align the mounting holes on the SATA drive with the
mounting holes on the HDD drive bay. Use 4 mounting screws to install the hard drive onto
the HDD drive bay.
Chapter 3 Installing Devices
Chapter 3
3. Slide the HDD drive bay back to the system and secure it with the thumb screws.
4. Connect the SATA data cable and power cable to the connectors on the SATA drive. And con-
nect the other end of the SATA data cable on the motherboard.
Drive bay
16
Mounting screw
Advertisement
Table of Contents
