Advantech ASMB-610 User Manual page 89

3.4.3.2 SATA And RST Configuration
SATA Controller(s)

Enable or disable SATA device.
SATA Mode Selection

Set as AHCI or RAID when SATA controllers are enabled.
SATA Controller Speed

Indicates the maximum speed the SATA controller can support.
SATA M.2 Port

Enable or disable SATA M.2 port.
Port 0~2

Enable or disable SATA port 0~2.
Hot Plug

Designates this port as Hot Pluggable.
Spin Up Device

If enabled for any ports, Staggered Spin Up will be performed and only the
drives which have this option enabled will spin up at boot. Otherwise all drives
spin up at boot.
SATA Device Type

Identifies the SATA port is connected to Solid State Drive or Hard Disk Drive.
Figure 3.25 SATA and RST configuration screen
81 ASMB-610 User Manual