2.9.1
ATX Soft Power Switch (Pins 1, 3)
If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to pins 1 and 3 on JFP1. This connection
enables you to turn your computer on and off.
2.9.2
Reset Connector (JFP1 Pins 2, 4)
JFP1 pins 2 & 4 are for a reset button.
2.9.3
Power LED (JFP1 Pins 14, 16)
JFP1 pin 14 and pin 16 are for the power LED. Refer to Appendix B for detailed infor-
mation on the pin assignments. If an ATX power supply is used, the system's power
LED status will be as follows.
Table 2.1: ATX power supply LED status
ACPI Power Mode
System On (S0)
System Suspend (S1, S3)
System Hibernation (S4)
System Off (S5)
2.9.4
Front Panel LAN Indicator (JFP1 Pins 5~8, 17~20)
JFP1 pins 5, 6, 7, 8, 17, 18, 19 and 20 connect to LAN indicator.
ASMB-610 User Manual
LED (ATX power)
On
Fast flash (1Hz)
Slow flash (0.25Hz)
Off
20