Advantech ASMB-831 Series Startup Manual

ASMB-831 Series LGA 6096 AMD EPYC™ 9004 ATX Server
Board with 6 x DDR5, 5 x PCIe x16 and 2 x PCIe x8,
9 x SATA3, 7 x USB 3.2 Gen1, Dual 10GbE, IPMI
Startup Manual
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
• 1 x ASMB-831 Startup Manual
• 1 x SATA data cable
• 1 x SATA power cable
• 2 x CPU power cables (8P)
• 2 x M.2 screws
• 1 x I/O port bracket
• 1 x PCIe I/O support
• 1 x Front panel converter cable
If any of these items are missing or damaged, please
contact your distributor or sales representative immediately.
Note 1: Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at:
https://www.adobe.com/downloads.html
(Acrobat is a trademark of Adobe.)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://support.advantech.com
Register your products on our website and get 2
months extra warranty for free at:
http://www.register.advantech.com
This manual is for the ASMB-831 series Rev. A1.
Part No. 2042083100
Printed in China
Specifications
Standard M/B Functions
• CPU: SP5 LGA 6096 AMD EPYC™ 9004 Series proces-
sors
• BIOS: AMI 256 Mbit SPI BIOS
• System Memory: 6* DDR5-3600/4000/4400/4800 Regis-
tered ECC DIMM
Note 2: Due to the inherent limitations of the PC architec-
• SATA Interface: 8 via SFF-8643 ports and 1 SATA 6Gb/s
port
• Serial Ports: One at the rear I/O, only supports RS-232
• Watchdog Timer: 255 timer intervals
• USB Port: Supports up to 7 x USB 3.2 Gen1 ports (4
rear ports, 2 ports from the onboard 20-pin header and
1*Type-A on board)
VGA Interface
• Chipset: ASPEED AST2600
• Display Memory: 64 MB
• Resolution: Supports VGA up to a resolution of 1920 x
1200 @ 60 Hz refresh rate.
Ethernet Interface
• Interface: 100/1000 Mbps & 10 GbE Base-T
• Controller: LAN1/2: Intel
cated LAN, BMC_LAN
Mechanical and Environmental
• Dimensions (L x H): 304 x 244 mm (12" x 9.6")
• Power Supply Voltage: +3.3 V, +5 V, ±12 V, +5 Vs
• Power Consumption (mainboard only, excluding I/O
devices): Max. load: +3.3 V @ 2.976 A, +5 V@ 3.264 A,
+12 V @ 0.616 A, +12V_8P_1 @ 15.72 A, +12V_4P_1
@ 6.876 A
• Weight: 1.05 kg (weight of board)
• Operating Temperature: 0 ~ 60 °C (depending on CPU)
1st Edition
Mar. 2023
ture, the system may not fully detect maximum
RAM capacity.
X710-AT2, LAN3: IPMI dedi-
®
ASMB-831 Startup Manual 1