Table Of Contents; Safety Instructions - Emerson GEODE CF370PN00 Owner's Manual

Section
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1. Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
2. Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Ceiling Fan Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9
4. How to Hang Your Ceiling Fan . . . . . . . . . . . . . . . . . .10-11
5. How to Wire Your Ceiling Fan . . . . . . . . . . . . . . . . . .12-16
6. Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-19
7. Wall Control Procedures . . . . . . . . . . . . . . . . . . . . . . . . . 20
8. Wall Control Installation . . . . . . . . . . . . . . . . . . . . . . . .21-24
9. Programming the Receiver Operating Frequency . . . . . . 25
READ AND SAVE THESE INSTRUCTIONS
WARNING
!
1. Read your owner's manual carefully and keep it for
future reference.
2. Be careful of the fan and blades when cleaning,
painting, or working near the fan. Always turn off the
power to the ceiling fan before servicing.
3. Do not put anything into the fan blades while they are
turning.
4. Do not operate reversing switch until fan blades have
come to a complete stop.
Additional Safety Instructions for Installation
1. To avoid possible shock, be sure electricity is turned
off at the fuse box before wiring, and do not operate
fan without blades.
2. All wiring must be in accordance with the National
Electrical Code "ANSI/NFPA 70-2017" and Local
Electrical Codes. Use the National Electrical Code
if Local Codes do not exist. The ceiling fan must be
grounded as a precaution against possible electrical
shock. Electrical installation should be made or
approved by a licensed electrician.

Table of Contents

Page
S
10. Using Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . . .25-26
11. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
12. Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
13. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
14. Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29
15. Energy Efficient Use of Ceiling Fan . . . . . . . . . . . . . . . 30
16. Instructions to the User . . . . . . . . . . . . . . . . . . . . . . . . . 30
Ceiling Fan Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . 31
Spanish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
French . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Safety Instructions

3. The outlet box and joist must be securely mounted
4. The downrod furnished with the fan provides the
5. Follow the recommended instructions for the proper
NOTE:
controls.
NOTE:
where necessary before installation.
To reduce the risk of electrical shock, this fan must be
installed with an isolating wall control/switch.
To reduce the risk of fire or electrical shock, this fan
should only be used with fan speed control, Model No.
UC7067RA, manufactured by Rhine Electric Co., Ltd.
To avoid fire, shock or injury, do not use an Emerson
or any other brand of control not specifically approved
for this fan.
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use this product.
Substitution of parts or accessories not designated
for use with this product by Emerson could result in
personal injury or property damage.
To reduce the risk of personal injury, do not bend
the blades during installation, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
2
ection
and capable of reliably supporting at least 50 pounds.
Use only U.L. outlet boxes listed as "Acceptable for
Fan Support of 22.7 kg. (50 lbs.) or less", and use
the mounting screws provided with the outlet box.
Most outlet boxes commonly used for support of light
fixtures are not acceptable for fan support and may
need to be replaced. Consult a qualified electrician if
in doubt.
CAUTION
!
To reduce the risk of injury, install the fan so that the
blades are at least 7 ft. (2.1m) above the floor.
minimum recommended floor to fan blade clearance
for an 8 foot ceiling.
method of wiring your ceiling fan. If you do not know
enough about electrical wiring, have your fan installed
by a licensed electrician.
This fan is suitable for use with solid-state speed
All set screws must be checked and re-tightened
WARNING
!
Page
ETL Model No.: CF370