Advertisement
Available languages
Available languages
ELECTRICAL CONNECTION AND SAFETY
All types free standing ovens in which termýnals for permanent connectýon by means of terminal block.
This appliance must be installed by a qualified person in accordance with the latest edition of the
national regulations in the destination country and in compliance with the manufacturer instructions
The appliance does not incorporate any means for disconnection from power supply. Means for
disconnection from the supply mains having a contact separation in all poles that provide full
disconnection under overvoltage category III conditions must be incorporated in the fixed wiring in
accordance with the wiring rules.
The disconnection means must be easily reachable after the installation
60x60 combined oven (electric oven with gas hob and one hotplate) does not have a supply
cord.
Near terminal block there is an electric scheme that You have to use when connecting the power cord
Warning: Before obtaining access to terminals, all supply circuits must be disconnected
Use only ordinary polyvinyl chloride sheathed cord (code designation 60227 IEC 53)
Connect the supply cable of appropriate section :
Do not leave anything on it when the door or drawer of oven is open. You may unbalance your appliance
or break the cover.
Do not put heavy things or flammable, burnable goods(nylon, plastic bag, paper, cloth etc.)into the
lower drawer.
Plug it off when you do not use the appliance and keep the gas valve off.
Product your appliance against atmospheric effects. Do not leave it to effects such as un,rain, snow,
powder etc.
6
L
N
220- 240 V ~
Advertisement
