Table of Contents
Advertisement
2) Exhaust oil. Remove the spark plug, pour a tablespoon of clean oil into the cylinder, pull the start handle a few
times to scatter the oil, and then install the spark plug back.
3)
Pull the handle slowly until it feels pressure. At this moment, the piston is rising to the top of its compression
stroke and the exhaust valve is closed. Storage in this case helps prevent rust inside the engine.
11.Troubleshooting
Cannot start the engine
Is there any fuel in the tank？
有
Is the start switch & oil switch on "ON"?
是
Does the engine has enough oil ？
是
Does the carburetor has enough gasoline？
Does the spark plug work？
Yes
Yes
Yes
Yes
No
Replace
No
Refuel
No
否
Turn the switch to "ON" position
No
否
Add recommended oil
否
No
Check if the tubes are damaged
Still not
working
Return the generator to
an authorized dealer
for further assistant
32
Advertisement
Table of Contents
