Start The Engine - Energizer EZG1600i-A-UK Original Instructions Manual

 Never run the engine without a filter, or dirt will enter the engine through the
carburetor and cause rapid wear of the engine.

6.Start the Engine

Recoil Start
Disconnect the load from the socket before starting the generator.
1. Turn the oil switch to "ON" position.
2.
Turn the power switch to "ON" position.
3. Turn the throttle arm to "OFF" position.
 Please turn the throttle arm to the "OFF" position or move the throttle arm to the 1/3
~1/2 position according to the temperature of the engine.
 When you add the fuel the first time or refuel the generator, the fuel is not stored in the
carburetor. The start handle should be pulled 3-5 times and then adjust the throttle arm
according to the temperature of the engine before starting the generator.
BE CAUTIOUS
Oil Switch
Turn the oil switch
BE CAUTIOUS
17