Table of Contents
Advertisement
If the generator is overloading or the connected device is internally faulty, the power indicator (green) will go off and
the overload indicator (red) will light up and there is no power output. The generator will still keep running until you
turn the start switch to "OFF" position.
Power indicator, Overload indicator and Oil alarm indicator：
Under normal operating conditions, the power output indicator (green) is on.
If the generator is overloading or the connected device is internally faulty, the power indicator (green) will go off and the
overload indicator (red) will light up and there is no power output.
If the overload indicator is on, please unplug the connected device from the generator, turn off the device, check the device
and the connecting cable, confirm the cause of the overload. After you find out the cause of the overload and confirm that
the problem has been resolved, press the Reset Button on the control panel. After 3 seconds the indicator will turn green
and the generator will start operating normally.
If you press the Reset Button, wait 3 seconds and the indicator on the generator doesn't turn green, please turn off the
generator and contact the authorized dealer.
If the oil alarm indicator is on, the engine will automatically shut down. Please check whether the oil should be added.
Before connecting the device to the generator, check whether the equipment is in good
condition and whether the required power exceeds the limit of the generator. Then start the
generator and connect the device.
Make sure the device is turned off before connecting to the generator.
NOTICE
When
overloaded or
short-circuited
(red)
Power output
(green)
Overload Indicator
(red)
Oil Alert (red)
Output Indicator
(green)
21
Advertisement
Table of Contents
