Power Over Ethernet (Poe) Device; Dc-Dc Poe; Ethernet Port; Poe Port - Redline Connect Series Installation Manuallines

RDL-3000 Connect-OW-OW
2.3

Power Over Ethernet (PoE) Device

2.3.1

DC-DC PoE

The Power over Ethernet (PoE) power injector provides power to the wireless terminal
using spare conductors on the Ethernet cable. The power input may be 10-30 VDC. All
Ethernet conductors are isolated (ETH and PoE) and have surge protection circuitry.

Ethernet Port

Connect this port to to the local 10/100Base-T network device. Data signals are passed
transparently between this port and the PoE port.

PoE Port

Connect this port to to the cable leading to the Connect-OW wireless terminal Ethernet
port.
the Ethernet cable at the point of cable ingress into the shelter or cabinet. Refer to the
installation section for details.
The following table lists the pinout for the PoE and Ethernet ports.
70-00200-01-00
Installation Guidelines

Figure 10: Features - DC-DC PoE Features

: System installation must include a dedicated surge protection device for

Figure 11: Description - POE ETH Port Pin Assignment

Table 5: Features - Pinout for POE and ETH Ports

Pin
1, 2
3, 6
4, 5
7, 8
Proprietary Redline Communications © 2014
Description
PoE
Data Pair 2
Data Pair 3
+Ve (out)
-Ve (out)
Page
ETH
Data Pair 2
Data Pair 3
N/C
N/C
19 of 58 December 3, 2014