Ac-Dc Poe; Figure 15: Features - Ac-Dc Poe - Indoor Power Module Pinout - Redline Connect Series Installation Manuallines

RDL-3000 Connect-OW-OW
2.3.2

AC-DC PoE

The Power over Ethernet (PoE) power injector provides power to the wireless terminal
using spare conductors on the Ethernet cable. The AC-DC power input may be 90-245
VAC. All Ethernet conductors are isolated (ETH and PoE) and have surge protection
circuitry.
The PoE adapter provides operational power for the Ellipse and the Ethernet connection
to the wireless interface.
Connect the Ethernet outdoor cable from the Ellipse to the OUTPUT (DATA &
1.
POWER) port on the PoE power adapter.
Connect the test PC or network connection to the INPUT (DATA) port of the PoE
2.
power adapter.
Connect the PoE power adapter to a compatible power source.
3.

Figure 15: Features - AC-DC PoE - Indoor Power Module Pinout

Customer equipment including personal computers, routers, etc., must be connected
only to the INPUT (DATA) port on the PoE unit.
Only the outdoors Ethernet interface cable connecting the Ellipse can be safely
connected to the PoE OUTPUT (DATA & POWER) port. Customer premises Ethernet
equipment may be damaged if connected directly to the PoE OUTPUT (DATA &
POWER) port.
70-00200-01-00
Installation Guidelines
Proprietary Redline Communications © 2014
to Service Personnel: 48 VDC
Page 23 of 58 December 3, 2014