Installation Safety; Professional Installation / Installations Professionnel; Safety Precautions; Electrocution Hazard / Risque D'électrocution - Redline Connect Series Installation Manuallines

Hide thumbs Also See for Connect Series:
Table of Contents

Advertisement

CONNECT-OWS
Installation Guidelines
WARNING
WARNING
WARNING
HOT SURFACE
ELECTRO-MAGNETIC
HIGH VOLTAGE
RADIATION
DO NOT TOUCH
1.3

Installation Safety

Professional Installation / Installations Professionnel

Redline CONNECT systems require professional installation. The user is responsible to
ensure all building and safety codes are met and the installation is complete and
secure.
The CONNECT system shall be installed according to local Electrical Safety Codes.
For Canadian installations, the entire equipment installation must comply with the
Canadian Electrical Code. For installations in the United States, the entire equipment
installation must be in accordance with Article 810 of the United States National
Electrical Code.
Les appareils CONNECT de Redline doivent être installés par un personnel
professionnel. Le personnel responsable doit s'assurer que l'installation est bien
achevée, et qu'elle répond aux exigences de tous les codes de sécurité.
Le CONNECT doit être installé conformément aux codes locaux de sécurité électrique.
Pour les installations Canadiennes, l'installation de l'équipement au complet doit se
conformer au Code Canadien de l'électricité. Pour les installations aux États-Unis,
l'installation de l'équipement au complet doit être en conformité avec l'article 810 du
Code des États-Unis National Electrical.

Safety Precautions

Installation and service must be done by personnel having technical training and
experience necessary to be aware of hazards during installation and/or service of
outdoors RF equipment. The installation and/or service must be done using procedures
designed to minimize any danger to technical personnel or any other person.
Use safety devices when working on or around the mast. Be aware of the risk of falling
objects. Use provided safety catches when hoisting antennas and radios.
Do not use any components (screws, nuts, etc.) other than those delivered together with
the Redline microwave radio equipment or those recommended by Redline.
Electrocution Hazard / Risque D'électrocution
Warning to Service Personnel
Do not install Redline products near any type of power line. Should the antenna or
related hardware come in contact with power lines, severe bodily harm or death could
result!
70-00200-02-00
Proprietary Redline Communications © 2014
Page
10
of 70
December 3, 2014

Advertisement

Table of Contents
loading

This manual is also suitable for:

Connect-ows

Table of Contents