Mounting Options; Table 23: Installation: Input Power Connector Pinout; Figure 36: Installation: Connect-Ows Power Wiring; Figure 37: Features: Connect-Ows Mounting Options - Redline Connect Series Installation Manuallines
Hide thumbs
Also See for Connect Series:
- Installation manuallines (58 pages) ,
- Installation manuallines (62 pages)
Table of Contents
Advertisement
CONNECT-OWS
Mounting Options
The Connect-OWS is provided with hardware for mounting feet and attachment to a
standard DIN rail. The Connect-OWS is compatible with a variety of 35 mm DIN rail
mounting products available from distributors (e.g., 19 inch TELCO rack, wall mount,
etc.).
DC Power Supply Wiring
The PoE input terminal block is a keyed Buchanan 796864-5 (or equiv.) connector. The
PoE supports dual floating power supplies to accommodate deployments with backup
power (e.g., A + B battery banks). All power inputs include overvoltage and reverse
polarity protection. The input voltage range is 10-30 VDC.
Pin
-V1
+V1
-V2
+V2
Ground Lug
A #10 ground-lug
terminate a grounding wire. All Connect-OWS systems must be properly grounded.
70-00200-02-00
Installation Guidelines
Figure 36: Installation: Connect-OWS Power Wiring
Figure 37: Features: Connect-OWS Mounting Options
Table 23: Installation: Input Power Connector Pinout
Description
-Ve power input #1
+Ve power input #1
-Ve power input #2
+Ve power input #2
is provided on the Connect-OWS chassis. Use this connection to
Proprietary Redline Communications © 2014
Page
49
of 70
December 3, 2014
Advertisement
Table of Contents
