Ethernet Surge Protection Device; Ethernet Port; Surge Arrestor Dimensions; Figure 16: Features - Ethernet Line Protection Device - Redline Connect Series Installation Manuallines

CONNECT-OWS Installation Guidelines
2.5

Ethernet Surge Protection Device

This Ethernet line protector is required to protect the in-cabinet equipment from lightning
induced power surges on the Ethernet lead-in cable.

Figure 16: Features - Ethernet Line Protection Device

Ethernet Port

The protection device includes two RJ-45 / F connectors. The cables may be connected
in any orientation. The protection device must be properly grounded to protect against
power surges and accumulated static electricity. Connect the grounding wire to the
device screw lug, DIN rail clip or mounting flange.

Surge Arrestor Dimensions

The surge arrestor dimensions (h-d-w) are: 44 x 54 x 34 mm (1.33 x 2.13 x 1.73 in).

Figure 17: Features - Ethernet Line Protection Device Dimensions

70-00200-02-00 Proprietary Redline Communications © 2014 Page 25 of 70 December 3, 2014