CONNECT-OWS
1
Utilities->
Product Options
2
Configuration->
System
3
Configuration->
Wireless
Important: The items in the table are required for basic installation. Based on the
Options Key installed, other features may be available that require configuration. Refer
to the RDL-3000 Family User Manual for additional information.
70-00200-02-00
Installation Guidelines
Options Key
System Name
TCP/IP
Address
Channel Size
RF Freq.
Tx Power
Antenna Gain
Proprietary Redline Communications © 2014
Enable operational
mode, throughput
setting, etc.
Name for wireless
terminal
TCP/IP address and
netmask. Enter IP
address and netmask or
enable DHCP.
Enter channel size used
on base station.
Enter frequency used on
base station.
Set the initial RF power
during registration.
Enter the manufactures
gain value (dBi) (DFS-
enabled systems only).
Page
64
of 70
December 3, 2014