7
•
Maintenance
Page 64
Figure 12: Installing the foam parts
b) Mount the two shipping lock screws that secure the mover
during transport.
Figure 13: Shipping lock screws securing the mover
c) Install foam parts 2, 3, and 4.
7. Remove the Charger from the Vanquish system.
8. In order to continue operating the autosampler without the Charger,
mount the metal cover plate to the opening on the autosampler
enclosure.
NOTICE
Always fix the shipping lock screws before moving or shipping.
Transporting the Charger or mover without fixing the shipping lock
screws will damage the mover.
Charger
Operating Manual