Palm Pre Plus User Manual page 208

• ETSI EN 300 328
• ETSI EN 301 489-1/-7/-17/-24
• EN 60950-1
• EN 50360
• EN 50371
Marking by the symbol indicates this equipment uses non-harmonized frequency bands.
France - 2.4GHz for Metropolitan France:
In all Metropolitan departments, wireless LAN frequencies can be used under the following
conditions, either for public or private use:
• Indoor use: maximum power (EIRP*) of 100 mW for the entire 2400-2483.5 MHz frequency
band
• Outdoor use: maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and with
maximum power (EIRP*) of 10 mW for the 2454-2483 MHz band
Precaution against hearing loss: Protect your hearing. Listening to this device at full
volume for a long period of time can damage your hearing.
A pleine puissance, l'écoute prolongée du baladeur peut endommager l'oreille de
l'utilisateur. Consultez notre site web
Responsible party
(North America)
Palm, Inc.
950 W. Maude Ave.
Sunnyvale, CA 94085
USA
www.palm.com
(Europe)
Palm Europe ltd.*
59-60 Thames Street
Windsor, Berkshire, SL4-1TX
UK
Radio Frequency Safety Exposure
General statement on Radio Frequency (RF) energy: Your phone contains a transmitter and a
receiver. When it is ON, it receives and transmits RF energy. When you communicate with your
phone, the system handling your call controls the power level at which your phone transmits.
Specific Absorption Rate (SAR): Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific organization ICNIRP
208 Regulatory and safety information
www.palm.com/fr pour plus d'informations.
and include safety margins designed to assure the protection of all persons, regardless of age
and health.
In order to certify this unit for sale in the US, Canada and Europe this unit has been tested for RF
exposure compliance at a qualified test laboratory and found to comply with the regulations
regarding exposure to RF Energy under the recommendations of the International Commission
on Non-Ionizing Radiation Protection (ICNIRP). The tests are preformed in positions and
locations as required by the FCC, IC, and The Council of the European Union for each model.
As SAR is measured utilizing the device's highest transmitting power, the actual SAR of this
device while operating is typically below that indicated below. This is due to automatic changes
to the power level of the device to ensure it only uses the minimum power required to
communicate with the network.
The SAR limit for mobile devices set by FCC/IC is 1.6 W/kg averaged over 1 gram of tissue for
the body or head (4.0 W/kg averaged over 10 grams of tissue for the extremities – hands, wrists,
ankles, and feet).
The highest reported SAR values of the Palm phone are:
Table 1. SAR Values (FCC)
Maximum 1g SAR values (W/kg) FCC
Head 0.923
Body 0.981
The SAR limit recommended by The Council of the European Union is 2.0 W/kg averaged over
10 grams of tissue for the body or head (4.0 W/kg averaged over 10 grams of tissue for the
extremities – hands, wrists, ankles, and feet).
Table 2. SAR Values (CE)
Maximum 10g SAR values (W/kg) CE
Head 0.787
Body 0.88
In order to comply with FCC, IC and EU RF exposure safety guidelines, users MUST use one of
the following types of body-worn accessories:
1 A Palm® brand body-worn accessory that has been tested for (specific absorption rate) SAR
compliance and is intended for use with this product.
2 An accessory that contains NO metal (snaps, clips, etc.) and provides AT LEAST 1.5 cm
(0.6 in.) of separation between the user's body and the unit.
Do NOT use the device in a manner such that it is in direct contact with the body (i.e., on the
lap or in a breast pocket). Such use will likely exceed the FCC RF safety exposure limits. See
www.fcc.gov/oet/rfsafety for more information on RF exposure safety.