MSA M1 Modular SCBA System Cleaning And Disinfection Manual page 16

3 Final Cleaning / Machine Cleaning
WARNING!
The washing instructions must be followed. Any deviation of the procedure(s) can lead to deterioration or failure of
the device.
Failure to follow this warning can result in serious personal injury or death.
Washing Detergent
Lanadol Aktiv by Kreussler is approved as washing detergent. The dosage is 5 ml/l.
Washing Program
The following washing program is given by the industrial washing machine type "Girbau HS6017" with 17 kg load
capacity. Total program time is approx. 44 minutes:
• main wash bath at 40 °C, high level 1:3,5 - gentle wash;
• bath time 20 minutes;
• intermediate spinning (approx. 600 - 800 rpm), 2 minutes each time the bath is changed;
• two rinsing baths without additives, level 1:4, 3 minutes each, gentle wash;
• final spinning (approx. 600 - 800 rpm) 5 minutes
Dry the device completely, for alphaBELT version 2 (see chapter
WARNING!
After each successful decontamination, cleaning and disinfection the product/component must be tested/checked
according to the manufacturer's requirements described in the relevant operating or maintenance manuals before
the product/component is put back into service.
Failure to follow this warning can result in serious personal injury or death.
Maintenance
Follow the information for maintenance and lubrication of the buckles in the relevant operating manual (10156928) .
16
5 ).
GB