Advertisement
items to hold one side of the long side frame, and
then cut the other side. Two people can then move
and take out the photovoltaic modules one by one
around the frame; the whole handling process needs
to be handled with care, and you must make sure to
not collide with any hard objects or allow any part of
the frame to touch the ground or be dragged.
If the unpacked modules are not
installed immediately, they should be
fixed to the stand supporter with a
safety rope.When the modules need to be
temporarily stored after unpacking, they should
be neatly and stably stacked on two pallets of
appropriate size, the number of stackedmodules
should not exceed 14.
1. Prepare the following tools before unpacking:
art knife (scissors), safety hat, stand supporter,
safety shoes and anti-cutting gloves.
2. Stand supporter must be used for vertical
portrait package unpacking, and the steps are
as follows:
3. Remove the packing belts, wrapping film, top
cover and carton box.
4. Place the stand supporter into the bottom of the
palletfrom the glass or backsheet side
5. Insert fixed bolts into the front hole of the
support.
6. Cut off the horizontal packing belts.
7. Cut off the vertical packing belts excepting two
inner belts.
8. Pushthe module gently to tilt towards the stand
supporter.
9. Cut the remaining packing belts.
8 Star Energy Pty Ltd | Level 35, 477 Collins Street, Melbourne VIC 3000 | https://www.energizersolar.com
9
8 Star Energy ESS Ltd | The Black Church, St Mary's Place, Dublin DO7 P4AX, Ireland
10. Tear off the anti-fallen tape on the first module
in the front, and then take out the modules in
order
11. Vertical portrait package unpacking steps
12. A fixed support (wall, rack, stable unpacked
module pallets, etc.) must be ready for vertical
landscape package unpacking, and the steps
are as follows
13. Remove the packing belts, wrapping film, top
cover and carton box.
14. Cut off the horizontal packing belts.
15. Cut off the vertical packing belts excepting two
inner belts, then push the module gently to tilt
towards the stand supporter.
16. Cut the remaining packing belts.
17. Take out the modules in order.
Vertical landscape package unpacking steps
5.3 Stacking of photovoltaic modules
When taking out the photovoltaic module from the
packing box, you need to lay the cardboard on the
ground first to prevent the photovoltaic module from
colliding and scratching with any cement surface or
hard object such as the ground, color steel, tiles,
metal corrugated roofing, etc.
When the photovoltaic modules are stacked, they
must be neatly and stably stacked on a horizontal
surface, and stacked with the glass side facing down
and the back side facing up. At the same time, there
Advertisement
