Advertisement
8.2 Photovoltaic module cleaning
If the PV module has a sufficient tilt angle (at least
15°), it is usually not necessary to clean the PV
module (rain will have a self-cleaning effect). If there
is a lot of dirt on the surface of the photovoltaic
module, which has seriously affected the power
generation, use water without detergent and a soft
sponge or brush to rinse the photovoltaic module
array when it is cool throughout the day. Do not
scratch or wipe the dust when it is dry, otherwise it
will cause tiny scratches. If there is snow, you can
use a brush with soft bristles to clean the surface of
the photovoltaic module.
For more detailed instructions related to cleaning
and maintenance, please refer to the "Photovoltaic
Module Cleaning Manual".
© 2023 Energizer. Energizer and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries and are used
under license by 8 Star Energy Pty Ltd. All other brand names are trademarks of their respective owners. Neither 8 Star Energy Pty Ltd nor
Energizer Brands is affiliated with the respective owners of their trademarks.
8 Star Energy Pty Ltd | Level 35, 477 Collins Street, Melbourne VIC 3000 | https://www.energizersolar.com
20
8 Star Energy ESS Ltd | The Black Church, St Mary's Place, Dublin DO7 P4AX, Ireland
Modified version and date
· Rev1.4, released in April 2023.
8 Star Energy Pty Ltd
Level 35, 477 Collins St,
Melbourne VIC 3000, Australia
8 Star Energy ESS Ltd
The Black Church, St Mary's Place,
Dublin DO7 P4AX, Ireland
Support Email Address: hello@energizersolar.com
Support Number: +61 1300 757 827
Advertisement
