Advertisement
All safety rules should be read
and
installing,
and/or
photovoltaic
photovoltaic
module
sunlight or other light sources, direct
current is generated. Direct contact with
the live part of the photovoltaic module,
such as terminals, whether or not a
photovoltaic module is connected, can
result in loss of life.
4.1 General safety measures
•
Before installation, please contact the relevant
local authority to determine the installation
permit and installation inspection requirements
that
meet
the
installation process should comply with the
safety rules applicable to all components in the
system, including cables, terminals, charging
monitors, batteries, inverters, etc.
If you install or operate photovoltaic modules on
•
a rainy day or in the morning with dew, you
need to take appropriate protective measures to
prevent water vapor from penetrating into the
connectors.
Unauthorized personnel are prohibited from
•
approaching the installation area or photovoltaic
module storage area.
It is forbidden to install or use damaged
•
photovoltaic modules.
•
It is forbidden to repair photovoltaic modules by
yourself, including but not limited to replacing
any components of photovoltaic modules
(diodes, junction boxes, connectors, etc.).
•
It is forbidden to plug in connectors of different
types and models.
It is forbidden for photovoltaic modules to be
•
used or exposed to the following substances in
an
environment
substances:
grease
8 Star Energy Pty Ltd | Level 35, 477 Collins Street, Melbourne VIC 3000 | https://www.energizersolar.com
4
8 Star Energy ESS Ltd | The Black Church, St Mary's Place, Dublin DO7 P4AX, Ireland
understood
before
wiring,
handling,
maintaining
modules.
When
is
exposed
local
requirements.
containing
the
following
or
organic
compounds
aromatics,
substances, mineral oil, alkanes (Such as
gasoline,
the
resurrection agents), alcohol, certain drugs
to
(white flower oil, active oil, bone-setting water,
thinner), adhesive sheets that can generate
oxime gas and potting glue (only for connectors)
(Such as KE200, CX-200/chemlok, etc.), TBP
(plasticizer), detergent, etc., to avoid chemical
damage
performance of photovoltaic modules.
It is forbidden to install photovoltaic modules in
•
windy weather due to safety issues.
It is forbidden to focus sunlight on photovoltaic
•
modules via external means.
The
•
It is forbidden to use photovoltaic modules in
relevant places such as movable platforms
(except for tracking brackets).
It is forbidden to disassemble and move any
•
part of the photovoltaic module; if the connector
of the photovoltaic module is wet, do not
perform any actions to avoid the risk of electric
shock.
•
Do not connect or disconnect the photovoltaic
module when there is current or external current
from the photovoltaic module.
The cover of the junction box should always be
•
kept closed.
•
Avoid partial shading of photovoltaic modules
for a long time. Otherwise, the temperature of
the shaded solar cells will rise (hot spot effect),
and in severe cases, the photovoltaic modules
may be burned, or even a fire may occur.
For photovoltaic modules used in deserts or
•
windy and sandy areas, it is recommended to
use connector dust caps before installation, or
take other measures to prevent sand and dust
from entering the connectors, otherwise it may
cause insertion problems or electrical safety
hazards.
ester
(such
as
DOP,
phenols,
ketones,
cleaning
lubricants,
and
affect
the
electrical
plasticizers),
halogenated
electronic
safety
Advertisement
