Advertisement
Backrest: height≥1.7m, width ≥1.5m
Cushion materials in front of the backrest
Due to the limitation of the height of
the container, when the photovoltaic
modules
container, the distance between the upper
surface of the forklift tines and the ground
should be less than 50mm, otherwise collisions
may easily occur, which may damage the
photovoltaic modules.
Unloading from container
Packaging turnover points are as follows:
1. When transporting the vertical portrait packages,
the entire module package shall prop against
the backrest, backrest shall be perpendicular to
the fork, and the structure must be firm
(withstand pressure ≥1.5 tonnes). When the
entire module package leans on the backrest,
the backrest shall not be deformed due to the
pressure. The package must be fixed using a
safety rope with tensile strength of ≥ 2000kg,
and you must place safety guardrails on both
sides of the forklift.
2. The forklift should be driven at a controlled
speed of ≤ 5 km/h in straight, and ≤ 3 km/h for
8 Star Energy Pty Ltd | Level 35, 477 Collins Street, Melbourne VIC 3000 | https://www.energizersolar.com
8
8 Star Energy ESS Ltd | The Black Church, St Mary's Place, Dublin DO7 P4AX, Ireland
are
removed
from
turning, so as to avoid sudden stop and rapid
start.
3. When using the hydraulic vehicle to transport
the modules, the distance between the upper
surfaceof the fork and the ground should be
less than or equal to 75mm.
the
Distance between the upper surface of the forklift
5.2 Unpacking
Before unpacking, please make sure that the
packaging box is in good condition, it is
recommended to use an art knife to remove the
packing belt and wrapping film.
you need to remove the stretch film first, then use a
knife to cut the binding tape, and remove the packing
box cover.
It is strictly prohibited to unload modules under
the weather conditions of wind speed greater than
Level 6, heavy rain or heavy snow.
If the inner packaging is fixed with anti-falling tape, a
group of two should hold the frame with both hands
in the same direction and take out the photovoltaic
modules one piece at a time, and remove the
photovoltaic module by tearing off a piece of fixing
glue. The photovoltaic modules in the box will fall; if
the internal packaging is fixed by the internal packing
belt, first cut the internal packing belt, use
anti-inverted sticks and other non-sharp and reliable
Forklift operation
tines and the ground.
When unpacking,
Advertisement
