Advertisement
frame, except when it is connected to the
ground. Scratches may cause corrosion of the
frame,
affecting
capacity and long-term reliability.
If the photovoltaic module glass or other
•
packaging materials are damaged, please wear
personal protective equipment to separate the
photovoltaic module from the site or the circuit.
It is strictly forbidden to touch wet photovoltaic
modules, unless you are wearing electric shock
protection
equipment
requirements.
•
When
professionals
photovoltaic modules, do not damage the
surrounding photovoltaic modules or their
support structures.
•
When cleaning photovoltaic modules, you must
follow the cleaning requirements of photovoltaic
modules.
The connectors must be kept dry and clean to
•
ensure that they are in good working condition.
Do not insert other metal objects into the
connector or make electrical connections in any
other way.
5
Handling and unpacking
If the photovoltaic module is not in use, please do
not open the product packaging. The goods should
be stored in a dark, dry and ventilated place. If the
photovoltaic modules are stored in an uncontrollable
environment, the storage time must be less than 3
months when the outer packaging of the photovoltaic
modules is kept intact.
It is recommended to take appropriate amount of
photovoltaic modules for unpacking according to the
project progress every day, and the unpacked
photovoltaic modules should be installed within a
day. After unpacking, the photovoltaic modules are
stacked on the ground. In severe weather such as
heavy rain, the photovoltaic modules may be
immersed in water for a long time and affect the
reliability of the product. In severe weather such as
8 Star Energy Pty Ltd | Level 35, 477 Collins Street, Melbourne VIC 3000 | https://www.energizersolar.com
6
8 Star Energy ESS Ltd | The Black Church, St Mary's Place, Dublin DO7 P4AX, Ireland
the
frame's
load-bearing
that
meets
replace
or
repair
typhoons, photovoltaic modules that have not been
installed may also be scraped away.
5.1 Transport
When the photovoltaic modules are transported to
the project site, they must be transported in the
packaging box provided by 8 Star Energy, and
should be stored in the original packaging box before
installation. Please protect the packaging from
damage.
the
It is necessary to protect the safety of photovoltaic
modules when unloading, especially when hoisting
roof projects. It is forbidden to use lifting straps
directly on the pallet for hoisting. The photovoltaic
modules should be placed in a protective device and
then hoisted to the roof to prevent the packing box
from deforming and bumping against any walls
during the hoisting process.
There are two packaging methods for 210mm-wafer
modules, vertical portrait package and vertical
landscape package. The requirements for unloading
and unpacking are also different. The packaging
method is as follows:
Vertical portrait package
When unloading with a crane please adhere to the
following:
1. Use specialized equipment for crane operation.
Select suitable hoisting equipment with enough
strength according to the weight and the size of
Vertical landscape package
Advertisement
