Table of Contents
Advertisement
Summary of parameter groups
Group
01 Actual values
03 Input references
04 Warnings and faults
05 Diagnostics
06 Control and status
words
07 System info
10 Standard DI, RO
11 Standard DIO, FI, FO
12 Standard AI
13 Standard AO
21 Start/stop mode
23 Speed reference ramp
24 Speed reference
conditioning
25 Speed control
28 Frequency reference
chain
30 Limits
31 Fault functions
32 Supervision
34 Timed functions
35 Motor thermal
protection
36 Load analyzer
40 Process PID set 1
46 Monitoring/scaling
settings
49 Panel port
communication
50 Fieldbus adapter (FBA)
51 FBA A settings
52 FBA A data in
Contents
Basic signals for monitoring the drive.
Values of references received from various sources.
Information on warnings and faults that occurred last.
Various run-time-type counters and measurements
related to drive maintenance.
Drive control and status words.
Drive hardware and firmware information.
Configuration of digital inputs and relay outputs.
Configuration of the frequency input.
Configuration of standard analog inputs.
Configuration of standard analog outputs.
Start and stop modes.
Speed reference ramp settings (programming of the
acceleration and deceleration rates for the drive).
Speed error calculation; speed error window control
configuration; speed error step.
Speed controller settings.
Settings for the frequency reference chain.
Drive operation limits.
Configuration of external events; selection of
behavior of the drive upon fault situations.
Configuration of signal supervision functions 1...6.
Configuration of the timed functions.
Motor thermal protection settings such as
temperature measurement configuration, load curve
definition and motor fan control configuration.
Peak value and amplitude logger settings.
Parameter values for process PID control.
Speed supervision settings; actual signal filtering;
general scaling settings.
Communication settings for the control panel port on
the drive.
Fieldbus communication configuration.
Fieldbus adapter A configuration.
Selection of data to be transferred from drive to
fieldbus controller through fieldbus adapter A.
Parameters 81
Page
83
88
89
90
94
99
100
106
108
115
123
129
131
132
137
138
143
152
166
177
186
190
205
208
209
213
215
Advertisement
Table of Contents
