Table of Contents
Advertisement
Additional parameter data
What this chapter contains
This chapter lists the parameters with some additional data such as their
ranges and 32-bit fieldbus scaling. For parameter descriptions, see chapter
(page 79).
Parameters
Terms and abbreviations
Term
Definition
Signal measured or calculated by the drive. Usually can only be
Actual signal
monitored but not adjusted; some counter-type signals can however be
reset.
Analog source: the parameter can be set to the value of another
Analog src
parameter by choosing "Other", and selecting the source parameter
from a list.
In addition to the "Other" selection, the parameter may offer other pre-
selected settings.
Binary source: the value of the parameter can be taken from a specific
Binary src
bit in another parameter value ("Other"). Sometimes the value can be
fixed to 0 (false) or 1 (true). In addition, the parameter may offer other
pre-selected settings.
Data parameter
Data
32-bit fieldbus equivalent: The scaling between the value shown on the
FbEq32
panel and the integer used in communication when a 32-bit value is
selected for transmission to an external system.
The corresponding 16-bit scalings are listed in chapter
(page 79).
Selection list.
List
Parameter number.
No.
Additional parameter data 273
7
Parameters
Advertisement
Table of Contents
