Additional parameter data
What this chapter contains
This chapter lists the parameters with some additional data. For parameter
descriptions, see chapter
Terms and abbreviations
Term
Definition
Actual signal
Signal measured or calculated by the drive. Usually can only be monitored
but not adjusted; some counter-type signals can however be reset.
Analog src
The parameter can be set to the value of another parameter by choosing
"Other", and selecting the source parameter from a list.
In addition to the "Other" selection, the parameter may offer other pre-
selected settings.
Binary src
The value of the parameter can be taken from a specific bit in another
parameter value ("Other"). Sometimes the value can be fixed to 0 (false) or
1 (true). In addition, the parameter may offer other pre-selected settings.
Data
Data parameter.
FbEq32
32-bit fieldbus equivalent: The scaling between the value shown on the
panel and the integer used in fieldbus communication when a 32-bit value
is selected in parameter group
The corresponding 16-bit scalings are listed in chapter
73).
List
Selection list.
No.
Parameter number.
Parameters
(page 73).
Additional parameter data 225
52 FBA A data in
or
53 FBA A data
7
out.
Parameters
(page