Additional Data: Actual Signals And Parameters; Chapter Overview; Terms And Abbreviations; Fieldbus Addresses - ABB ACS800 Series Firmware Manual

Additional data: actual signals and parameters

Chapter overview

This chapter lists the actual signal and parameter lists with some additional data. For
the descriptions, see chapter

Terms and abbreviations

Term
PB
FbEq
Absolute Maximum Frequency
Absolute Maximum Speed

Fieldbus addresses

Rxxx adapter modules (such as RPBA-01, RDNA-01, etc.)

See the appropriate fieldbus adapter module User's Manual.

Nxxx adapter modules (such as NPBA-12, NDNA-02, etc.)

NPBA-12 Profibus Adapter:
All versions
• see column PB in the tables below.
Version 1.5 or later
• see NPBA-12 PROFIBUS Adapter Installation and Start-Up
Guide [3BFE64341588 (English)].
NIBA-01 InterBus-S Adapter:
• xxyy
number
Example: The index number for drive parameter 13.09 is 1309 + 12288 = 13597
(dec) = 351D (hex)
NMBP-01 ModbusPlus Adapter and NMBA-01 Modbus Adapter:
• 4xxyy, where xxyy = drive parameter number
100 + 12288 converted into hexadecimal, where xxyy = drive parameter
·
Actual signals and parameters.
Definition
Parameter address for the fieldbus communication through a
Profibus link (Add 4000 in FMS Mode).
Fieldbus equivalent: The scaling between the value shown on
the panel and the integer used in serial communication.
Value of 20.08 FREQUENCY MAX, or
if the absolute value of the minimum limit is greater than the
maximum limit.
Value of parameter 20.02
MINIMUM SPEED if the absolute value of the minimum limit is
higher than the maximum limit.
Additional data: actual signals and parameters
20.07 FREQUENCY MIN
MAXIMUM SPEED, or 20.01
175