Stroboscope Testrecord User Manual - Clearaudio Innovation User Manual

User manual
Stroboscope Testrecord
Clearaudio Stroboscope Testrecord satisfies the highest demands for an exact speed adjustment
The
for turntables. Dramatic sound improvements can be reached only with exact calibrated speeds.
- Optimal adjustment for turntables -
Stroboscope Testrecord
Please place the
turntable. The big advantage of the
your cartridge onto the
provided on the disc. This means, for the first time a real time speed analysis is possible under
realistic circumstances.
I f you have the impression that the horizontal lines move on the scale, you should set or readjust
the speed of the motor again.
- I f the lines move clockwise, the speed is too fast.
- I f the lines move counter clockwise, the motor speed is too slow.
Please correct the speed on your motor or turntable until you have the impression that the lines
stopped moving. After that you have reached the exact speed and you can enjoy the full potential
of your vinyl collection again.
Made in Germany
To adjust the exact speed, please choose the side for 50 / 60 Hz, or the
other side for the use with the speed light first. If you choose the side
without the speed light source, you can use the regular light source for
the installation, either 50 Hz (outer scales) or 60 Hz.
The scales are graduated in three different reading options:
33.3 Hz, 45 Hz and 78 Hz (starting from the outer diameter).
on your turntable platter and start the engine of your
Clearaudio Stroboscope Testrecord
Stroboscope Testrecord
, while measuring the speed, as there are grooves
is, that you can place
Page 21