Stroboscope Testrecord User Manual - Clearaudio Innovation Wood User Manual

Stroboscope Testrecord
Stroboscope Testrecord
The Clearaudio
turntables. Dramatic sound improvements can be reached only with exact calibrated speeds.
To adjust the exact speed, please choose the side for 50 / 60 Hz, or the other side for the use with the
speed light first. If you choose the side without the speed light source, you can use the regular light
Stroboscope Testrecord
measuring the speed, as there are grooves provided on the disc. This means, for the first time a real time
speed analysis is possible under realistic circumstances.
If you have the impression that the horizontal lines move on the scale, you should set or readjust the
speed of the motor again.
- If the lines move clockwise, the speed is too fast.
- If the lines move counter clockwise, the motor speed is too slow.
Please correct the speed on your motor or turntable until you have the impression that the lines stopped
moving. After that you have reached the exact speed and you can enjoy the full potential of your vinyl
collection again.
© Clearaudio electronic GmbH 2016
satisfies the highest demands for an exact speed adjustment for
- Optimal adjustment for turntables -
source for the installation, either 50 Hz (outer scales) or 60 Hz. The scales
are graduated in three different reading options:
33.3 Hz, 45 Hz and 78 Hz (starting from the outer diameter).
Please place the
the engine of your turntable. The big advantage of the Clearaudio
is, that you can place your cartridge onto the
Stroboscope Testrecord
Innovation
User manual
on your turntable platter and start
Stroboscope Testrecord
User manual
, while
Page 17